1. After connecting the power supply, first face the meat grinder tube and check whether the direction of the output shaft at the is correct. The correct direction of the meat grinder is counterclockwise rotation. It is strictly forbidden to rotate in the opposite direction. After the test run is, cut off the power supply and assemble the parts before use. Otherwise, it is easy to damage the parts.

2. Before starting the machine, do not tighten mouth ring too much. After starting, you can adjust the mouth ring to the appropriate degree at any time. The machine can be used to grind meat when it is normally. All kinds of meat must be skinned and boned before grinding. The meat blocks are long and strip-shaped, which can improve the efficiency of grinding. not drop foreign objects into the meat grinding tube before and during use to prevent accidents.

3. If you find that the meat block stops at the feed port during use do not use your hands to poke it. You should use a wooden hammer to press it. If there is a jamming phenomenon, you should quickly press the red button stop the machine and eliminate the fault before you can continue to use it. Note: When eliminating the fault, you must pull the switch to cut off the power to accidents.

4. If you find that the triangular belt is too loose or too tight during use, you can loosen the adjusting nut behind and adjust the position of the. After it is appropriate, tighten the nut again.

5. After the machine is used, in the case of complete power failure, disassemble the parts in turn clean them and put them away for next use.

6. When operating, you should concentrate and strictly prohibit idle talk, chatting, playing and fighting.

7. After machine is used, you must pull the switch to cut off the power and clean up. Before leaving work, you must check whether the power switch is turned off